Keep Your Dryer Performing Well: A Complete Checklist!

Maintaining your clothes dryer properly is important for maximum efficiency. Regular maintenance reduces energy consumption and repairs. It is important to improve and maintain the proper functioning of the machine dryer. Thinking about how you can maintain your dryer? We have got you covered. This article is a complete dryer maintenance checklist you need in 2024. So, here we go! 

1. Clean the Lint Filter After Every Load

Cleaning the lint filter is an important maintenance duty. Airflow might be restricted by a blocked lint filter, which can make your dryer work harder and raise the possibility of overheating or even fires. To make the lint filter clean:

• Take off the dryer's filter.
• Use a soft brush to remove the lint.
• Rinse the filter with warm water and soap if it is not cleaned. Then, let it dry fully before re-inserting it.

2. Inspect and Clean the Vent System Regularly

Lint and debris can build up in the dryer vent system with time. It consists of the exhaust duct and vent hood. This impacts the functioning of the system and may catch fire. For the upkeep of your dryer NZ vent system:

• Take the dryer's power cord out of the outlet.
• From the dryer's back, remove the vent hose.
• Lint can be removed from the vent hose and the duct that leads to the outer vent by using a vacuum or a dryer vent cleaning kit.
• Inspect the external vent hood for obstructions and perform necessary cleaning.

3. Check the Drum for Foreign Objects

Check the drum regularly for any foreign objects or buttons. These small items may have fallen out of pocket. These items may harm the drum or produce noise while it is in use. To look for extraneous objects:

• Once the dryer has turned off, unplug it.
• Examine the drum with your eyes after opening the dryer door.
• If you need to see the entire interior, use a flashlight.
• Eliminate any alien things discovered.

4. Clean the Moisture Sensor

The sensor measures the moisture content of your clothing. Further, it modifies the drying time accordingly. The sensor might not work properly if it becomes covered in fabric softener or dryer sheet residue. Thinking about how to keep the moisture sensor clean?

• Find the sensor first! It is often located next to the lint filter inside the drum.
• Use a gentle cloth moistened with rubbing alcohol. It is to clean the sensor.
• Before using the dryer again, let the sensor entirely dry.

5. Ensure Proper Ventilation

For your dryer's safety and functionality, proper ventilation is essential. Place the dryer in a spot where there is proper ventilation. Additionally, there must be no obstructions in the vent system. To guarantee enough ventilation:

• Keep clutter away from the area surrounding the dryer.
• Verify that the vent hose is not crushed or kinked.
• Make that there is no restriction on the vent hood's ability to open and close.

6. Level the Dryer

An unlevel dryer produces loud noises and vibrations. This results in premature wear and tear. To make your dryer level:

• A carpenter's level should be placed on the dryer.
• Once the dryer is level from front to back and side to side, adjust the levelling feet located at its base.
• To ensure the levelling feet stay in place, tighten the lock nuts.

7. Avoid Overloading the Dryer

When the dryer is overloaded, it becomes less efficient. Additionally, it takes longer to dry and puts undue stress on the motor and other parts. To prevent being overloaded:

• Observe the load size recommendations provided by the manufacturer.
• Make sure the drum has enough room for the clothing to fall about freely.
• Large, bulky objects should be dried apart from lighter, smaller items.